Grizzly Home Safety Product H8239 User Manual

MODEL H8239

SAFETY LOCKING ON/OFF

SWITCH

INSTRUCTIONS

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

safety

Key

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

Figure 1. h8239 safety paddle switch.

• Installation must only be performed by an

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

Introduction

the Model h8239 features a large on/oFF pad-

dle with a removable safety key that can be used

to disable the switch. this switch is designed to fit

into ⁷⁄8" x 1⁵⁄8" rectangular hole or mounted over a

1¹⁄8" x 2¹⁄4" rectangular hole with four #5 screws.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

Specifications

rated horsepower........................................ 2hp

rated Voltage.....................................125V/250V

rated Current Amperage ..............................20A

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or rated

for these environments.

• Make sure there is a verified machine

ground on the circuit this switch is

installed.

WARNING: NO pORTION OF THIS INSTRUCTION SHEET MAY bE REpRODUCED IN ANY SHApE

OR FORM WITHOUT THE WRITTEN AppROvAL OF GRIzzLY INDUSTRIAL, INC.

#ts13931 printed in ChinA